MUT2200 EL and MUT2500 EL represent the state of art of EUROMAG INTERNATIONAL production for water cycle and process application.
The new structure for the generation of the magnatic field, the innovative route of the signal generated by electrodes provide a sensor with an extremely wide measurement range: EL= Extended Linearity.
This new series follows the successful tradition of MUT 2200/2500 introducing a measurement range of more than 1:1000 without linearization software. These kind of performances allow very accurate measures on a wide flow rates, that, before, would have been reset because of the effects of the converters cut off.
|
|
Read more...
|
MUT 2200EL and MUT2500 EL rapresent the state of the art of EUROMAG INTERNATIONAL production for water cycle and process application.
The new structure for the generation of the magnetic field, the innovative route of the signal generated by the electrodes, provide a sensor with an extremely wide measurement range: EL= Extended Linearity.
This new sensors series follows the successful tradition of the MUT 2200/2500 introducing a measurement range of more than 1:1000 without linearization software.
These kind of performances allow very accurate measures on a wide flow rate range and to count lower flow rates that, before, would have been reset because of the effects of the converters cut off.
|
|
Read more...
|
MUT1000EL sensors represent the state of art of EUROMAG INTERNATIONAL production for water cycle and process application. The new structure for the generation of the magnetic field, the innovative route of the signal generated by the electrodes, is giving a sensor with an extremely measurement range, keeping the extremely compact dimensions: EL Extended Linearity.
This new sensors series follows the successful tradition of the MUT1000EL introducing a measurement range of more than 1:1000 without linearization software. These kinds of performances allow doing very accurate measures on a wide flow rate and to count lower flow rates that before would have been reset because of the effects of the converters cut off.
|
|
Read more...
|
EUROMAG INTERNATIONAL MUT1100J are flangeless sensors that cover all diameters from DN 25 to DN 150. When light weight and compact dimensions are required, the choice of sensors cannot be other than MUT1100J. These models are installed beetween two flanges surrounded by studs. For this reason they are also called "wafer sensors".
|
|
Read more...
|
EUROMAG INTERNATIONAL MUT500 series are the most suitable for the measurement of the small flow rates of liquids electrically conductive for temperature up to 160°. They cover all diameters from DN 3 to DN 20 as shown in Table 1.
The degree of protection is IP68 for 1.5 m permanent immersion in water. The flow tube is made in PTFE.
The coils for the generation of the magnetic field are mounted on the external part of the flow tube, all enclosed in the stainless steel sensor body. Two measurement electrodes are placed at diametrically opposite points of the flow tube.
|
|
Read more...
|
|
The EUROMAG INTERNATIONAL MUT2400EL series are sensors specifically designed for use in the food processing industry. They are made of materials approved for the purpose by international regulations, they are compatible with the temperature and products required for sanitary reasons, and equipped with the attachments used today in the foodstuffs field.
They are suitable for the flow rate electrically conducible liquids with a temperature up to 140°C. The MUT2400EL sensors are manufactured with diameters from DN 25 to DN 100 as indicated in Table 1. The degree of protection is IP 68 for a permanent emersion in water to a depth of 1.5 meters.
|
|
Read more...
|
Encouraged by the RD dept.of "Automobili Lamborghini S.p.A.", Euromag International has recently developed and completed a brand new flowmeter, designed primarily for the automotive market.
Designed with light and innovative materials, MUT4000 has a compact and versatile design with hose connections, for a quick easy installation.
|
|
Read more...
|
EUROMAG INTERNATIONAL Insertions flow meters represent the best answer when low cost and good performance are needed. The MUT2700 sensors are suitable for wide pipes, and can be installed without interrupting the flow.
They are made of a probe wich has to be inserted into the tube for 1/8 of its internal diameter. The nominal working pressure is 25 bar. The sensor is installed trough a treaded muff to be connected to its ball valve, once it is welded to the pipe.
|
|
Read more...
|
EUROMAG INTERNATIONAL Insertion flowmeters represent the best answer when low costs and good performance are needed.
EUROMAG INTERNATIONAL MUT2660 sensors are suitable for small pipes from 80 mm DN to 500 mm under a maximum pressure of 10 bar. They are made of 34 mm probe which has to be inserted into the tube for 1/8 of its internal diameter. The sensor is installed through 1.1/4" threaded brass muff , to be welded to the pipe.
|
|
Read more...
|
EUROMAG INTERNATIONAL Insertion flow meters represent the best answer when low cost and good performance are needed. The MUT2770 sensors are suitable for wide pipes under maximum pressure of 16 bar in the standard version (as indicated in table 1 and 2).
They are made of a 47 mm probe, which has to be inserted into the tube for 1/8 of its internal diameter. As all magnetic meters, they can be used to measure liquid flow rates with electrical conductivity of 5 μS/cm minimum.
|
|
Read more...
|
|
|
|
|
|
Electromagnetic flowmeters